Alloy Steel Plates and Sheets

AMSE SA516 standard specification for pressure vessel plates, carbon steel for moderate and lower- temperature service.

AMSE SA516 plates 40mm and under in thickness is normally supplied in the as-rolled condition. The plates may be ordered normalized or stress relieved, or both. AMSE SA516 grade plates over 40mm in thickness shall be normalized.

Size:
Thickness: 6MM to 300MM,

Width: 1500mm to 4050mm,

Length: 3000mm to 15000mm 

 

We offer quality Carbon Steel Plates, Carbon Steel Sheets, Alloy Steel Plates and Alloy Steel Sheets that are manufactured using high grade Carbon Steel and Alloy Steel respectively. Conforming to ASTM, ASME and IS standards, these are offered in standard and customized options based on the requirements of our clients. 

ASTM / ASME SB 162 UNS 2200 (NICKEL 200) / UNS 2201 (NICKEL 201)
ASTM / ASME SB 127UNS 4400 (MONEL 400)
ASTM / ASME SB 424 UNS 8825 (INCONEL 825)
ASTM / ASME SB 168UNS 6600 (INCONEL 600) / UNS 6601 (INCONEL 601)
ASTM / ASME SB 443 UNS 6625 (INCONEL 625)
ASTM / ASME SB 574 UNS 10276 ( HASTELLOY C 276)
ASTM / ASME SB 462 UNS 8020 (ALLOY 20 / 20 CB 3)

Our clients are offered with a wide range of alloy steel plates that can be availed in metal finishes like stainless and duplex steel, carbon and alloy steel. These are made available in a wide range of grades like ASTM/ASME SA240 340, 3041, 304h and others. Its further specifications are given below:

 

Stainless & Duplex Steel:

 

Range: 1 mm to 200 mm THK in 1000 mm to 3000 mm width x 2500 mm / 5000 mm / 10000 mm / coil

 

Stainless Steel: ASTM / ASME SA 240 304 , 304l , 304H, 309S , 309H, 310S , 310H , 316 , 316h , 316l , 316 ti , 317 , 317l , 321 , 321h , 347 , 347 h , 409 , 410 , 410s , 430

 

Duplex Steel: ASTM / ASME SA 240 uns no. S 31803, s 32205, s 32550, s 32750, s 32760

 

Carbon & Alloy Steel:

 

Range: 1 mm to 200 mm thk in 1000 mm to 3000 mm width x 2500 mm / 5000 mm / 10000 mm / coil

 

Carbon Steel: ASTM / ASME SA 516 / 517 gr. 60 / 70, is 2062, is 2002

 

Alloy Steel: ASTM / ASME A 387 gr f 5, f 9 , f 11 , f 12 , f 22 , f 91.